Journal · Collector’s Guide

Colt Python Red Dot Build: The Halloween Werewolf

This Colt Python red dot build is a second-generation Python in .357 Magnum, stainless, with checkered walnut grips and the Colt medallion. It wears a Holosun HS403B red dot on an Empire KAGE V2, a one-piece compensator and bottom rail that bolts to a top rail sitting where the factory rear sight used to be. For Halloween we set it on the table next to some silver, dressed a target dummy as a werewolf in a blue T-shirt, and took it to the range. The werewolf is still standing. The shirt is another story.

A stainless Colt Python .357 with a Holosun HS403B red dot and an Empire KAGE V2 compensator, silver .357-size pieces standing in front of it
Our Python with the Holosun HS403B and the Empire KAGE V2, and silver on the table.
The werewolf meets the Python. Sixteen seconds.

Why silver, and why a werewolf

Silver against witches and monsters is old folklore. In the Brothers Grimm story The Two Brothers, a huntsman fires at a witch and his lead bullets do nothing. He tears three silver buttons off his coat, loads them, and the next shot drops her.

German werewolf tales have silver too. In a legend from Greifswald, printed by J. D. H. Temme in 1840, students who could do nothing against the town’s werewolves pooled the silver buttons they had inherited and killed them with those, according to D. L. Ashliman’s translation for the University of Pittsburgh.

Hollywood made it the rule everyone knows. In Universal’s The Wolf Man (1941), Larry Talbot picks up a walking stick topped with a silver wolf’s head, and at the end his own father, Sir John, kills the werewolf with that silver-headed cane. In House of Frankenstein, which opened in New York in December 1944, Talbot asks Ilonka to make silver bullets and load a gun, and the Wolf Man is shot dead with a silver bullet.

So we brought silver, and a modernized Colt Python. In our video the werewolf gets the last word: Dude. My shirt.

The Colt Python, from 1955 to the 2020 return

Colt introduced the Python in 1955 as the top of its revolver line, chambered for .357 Magnum. It had started out as an idea for a large-frame .38 Special target revolver, which explains its adjustable target sights, smooth trigger and heavy build. The look is what people remember: a ventilated rib along the top of the barrel and a full-length underlug beneath it. The Python was also the first Colt finished in Royal Blue, a deep blue over a very high polish. First-generation guns were hand-fitted by Colt gunsmiths.

In October 1999 Colt announced it would end Python production, and the Colt Custom Shop kept building small numbers on special order until 2005.

In January 2020 Colt brought it back, in stainless steel; blued guns followed later. Colt reworked the parts that had earned the old gun a reputation for wearing under hard use with full-power .357 Magnum. The redesigned rear sight let Colt add about 30 percent more steel to the top strap above the cylinder. The mainspring was reshaped and the lockwork simplified to get rid of “stacking,” the way the old trigger got sharply heavier near the end of its pull. More precise machining and metal injection molded parts took over much of the fitting that gunsmiths once did by hand. Today Colt lists the Python with 2.5, 3, 4.25, 5, 6 and 8 inch barrels.

How to read the marks on a modern Colt Python

On ours, most of the barrel sits inside the KAGE, so the roll marks are partly hidden by the clamps. Enough shows to read them.

The left side of a stainless Colt Python barrel inside an Empire KAGE V2; the visible roll mark reads THON .357 over 357 MAGNUM with a star, the rest hidden by the clamp
Left side of the barrel, partly hidden by the clamp: the model name and the cartridge.

On the left side of the barrel is the model and cartridge: PYTHON .357, with .357 MAGNUM below it. The front of both lines is under the KAGE clamp in our photo. On the right side is the maker’s line, COLT’S MFG. with the Hartford address, beginning with the stylized Colt logotype.

The right side of a stainless Colt Python barrel with the Colt logotype and COLT'S MFG. HARTFORD roll mark, the end hidden by the black Empire KAGE V2 clamp
Right side: Colt’s company line and Hartford address, running under the KAGE clamp.

Behind the cylinder, the left side of the frame carries the rampant colt, Colt’s rearing horse, and the walnut grips carry a round Colt medallion with the same horse.

The rampant colt stamp on the frame of a stainless Colt Python, beside the checkered walnut grip and its silver Colt medallion
The rampant colt on the frame and the medallion in the checkered walnut grip.

If you are trying to tell a new Python from an old one, stainless alone does not settle it: Colt also made stainless Pythons during the original production run. The serial number is the place to start, and Colt runs a serial number lookup on its website.

How the KAGE and the red dot go on

The KAGE does not touch the frame’s top strap with a cut or a drilled mount. It clamps around the barrel and the underlug instead.

According to Empire’s installation instructions, the factory sights come off first: the front sight is held by a screw with factory threadlocker, and the rear sight by a roll pin and a screw. A top rail goes on in their place. The compensator and bottom rail, one part on the V2, slide on from the front, line up with the top rail, and the two are screwed together through the clamp sections. Empire recommends a qualified gunsmith for the job, and it points out that the KAGE puts a compensator on a barrel that is not threaded, so it should be inspected before and after every range trip, more often with hot loads. We mounted the red dot ourselves.

A stainless Colt Python with the cylinder swung open, a Holosun HS403B on the KAGE top rail and a speedloader of silver .357-size pieces beside it on the turntable
Cylinder open with the KAGE in place, and a speedloader of silver beside it.

Empire describes the KAGE V2 as CNC machined from billet and built to a specific model and barrel length, and offers it for 3, 4.25, 5 and 6 inch Pythons. It is made only for 2020 or newer Pythons. The ported block at the front is the compensator; Empire says it helps reduce recoil for faster, more accurate follow-up shots. The rails take optics, lights and lasers.

On top sits a Holosun HS403B, a compact red dot. The markings on its body read HS403B, 2 MOA, LED. With the factory sights gone, the dot is the only sight on the gun.

At the range with the werewolf

The werewolf was a target dummy with a wolf-head mask and a blue T-shirt, set on a stand in front of a berm. The shooting in the video is a six-round string from over the shoulder, with the red dot right in the line of sight.

Over-the-shoulder view of a shooter holding the Colt Python with a Holosun red dot and Empire KAGE compensator at an outdoor range
Over the shoulder: the red dot and the KAGE from the shooter’s side.
A target dummy with a wolf-head mask and a blue T-shirt on a stand at an outdoor range, the shooter facing it
The werewolf and the shooter on range day.
Close-up of the chest of a blue T-shirt on the werewolf target, with a cluster of bullet holes
The shirt, after range day.

Specifications

ItemThis Python
MakerColt’s Manufacturing Company (barrel marked Hartford)
ModelPython, second generation (2020 and later)
Cartridge.357 Magnum
ActionDouble action / single action revolver
Capacity6 rounds
MaterialStainless steel
GripsCheckered walnut with Colt medallions
OpticHolosun HS403B, 2 MOA red dot
Rail and compensatorEmpire KAGE V2, one-piece compensator and bottom rail on a top rail
Iron sightsFactory front and rear removed for the KAGE

On the floor at OSA

The Python in these photos is part of our own collection. If it has you thinking about a Python or a red dot handgun, these pieces in our case are related:

For another revolver, read about our engraved Korth revolver. For slide-mounted pistol optics, see our comparison of the Holosun 507COMP, 407COMP and 507 Pro Max.

The grid below updates by itself as pieces come and go.

Best werewolf movie of all time? Tell us on our Instagram. Watch it on Instagram.

General information for collectors, not legal advice. Empire recommends a qualified gunsmith for KAGE installation and regular inspection of the compensator, which mounts on an unthreaded barrel.

Common Questions

Can you put a red dot on a Colt Python?Yes. On a 2020 or newer Python, one option is a rail system that clamps around the barrel, such as the Empire KAGE, with the optic on its top rail; the factory front and rear sights come off for the install.
Does the Empire KAGE fit an original 1955 to 2005 Colt Python?No. Empire states the KAGE is designed only for 2020 or newer Colt Pythons and is made to a specific model and barrel length: 3, 4.25, 5 or 6 inches.
Do you keep iron sights with the Empire KAGE on a Python?No. Empire’s instructions remove the factory front and rear sights so the top rail can go on, so the optic becomes the only sight.
What changed on the 2020 Colt Python?Colt brought the Python back in January 2020 in stainless steel, redesigned the rear sight to add about 30 percent more steel to the top strap, reshaped the mainspring and simplified the lockwork to stop the trigger from stacking.
When was the Colt Python first made?Colt introduced the Python in 1955. It announced the end of production in October 1999, the Custom Shop built Pythons on order until 2005, and the model returned in 2020.
Where does the silver bullet werewolf legend come from?Silver against witches and werewolves turns up in 19th-century German folklore, such as a Greifswald tale printed in 1840 where silver buttons kill werewolves. Universal’s films made it famous: a silver-headed cane in The Wolf Man (1941) and a silver bullet in House of Frankenstein (1944).

Sources

  • Wikipedia, “Colt Python” — https://en.wikipedia.org/wiki/Colt_Python (1955 introduction in .357 Magnum and target-revolver origin, vent rib and underlug, Royal Blue, hand fitting, October 1999 announcement and 2005 Custom Shop end, January 2020 return in stainless, 30 percent more top-strap steel, mainspring and stacking, machining and metal injection molding, stainless Pythons in the first generation)
  • Colt’s Manufacturing Company, “Python” — https://www.colt.com/series/python (current barrel lengths, serial number lookup)
  • Colt’s Manufacturing Company, “Blued Python” — https://www.colt.com/detail-page/blued-python/ (current blued Python)
  • Empire, “KAGE V2 Compensator System for Colt Python” — https://empirepbf.com/made-to-order-kage-v2-compensator-system-for-colt-python/ (one-piece compensator and bottom rail on a top rail, billet CNC, 2020 or newer only, model and barrel length specific, 3/4.25/5/6 inch options, recoil reduction)
  • Empire, “Colt Install Instructions” — https://empirepbf.com/info/install-instructions/colt-install-instructions/ (sight removal, install steps, qualified gunsmith, non-threaded barrel and inspection)
  • Grimm, “The Two Brothers” — https://www.grimmstories.com/en/grimm_fairy-tales/the_two_brothers (silver buttons against the witch)
  • D. L. Ashliman, University of Pittsburgh, “Werewolf Legends from Germany” — https://sites.pitt.edu/~dash/werewolf.html (Greifswald werewolves killed with silver buttons, from Temme 1840)
  • Wikipedia, “The Wolf Man (1941 film)” — https://en.wikipedia.org/wiki/The_Wolf_Man_%281941_film%29 (silver wolf’s-head walking stick, Sir John kills the werewolf with it; Talbot shot dead with a silver bullet in House of Frankenstein)
  • Wikipedia, “House of Frankenstein (1944 film)” — https://en.wikipedia.org/wiki/House_of_Frankenstein_%281944_film%29 (New York release 15 December 1944, Talbot has Ilonka make silver bullets)