Journal · Collector’s Guide

Luger Barrel Length: Five Lugers, Carbine to P08

Luger barrel length is the first way to sort the family. The same toggle-action pistol was built with an 11¾-inch barrel for the Carbine, 8 inches for the Artillery model, 6 for the Navy, 4¾ for the Swiss and 4 for the standard German Army P08 of the First World War. We lined up all five, longest to shortest, and put each one through the full cycle on camera: toggle open, magazine out, toggle home, magazine back in. No shots are fired in the video.

Five Lugers, longest barrel to shortest, each cycled in one unbroken take.

Why one pistol came in so many lengths

The five guns on our table share one design and one toggle action, but they wear five different barrels, and two of them take a shoulder stock. Two dates matter for this lineup. Switzerland adopted the Luger first, back in 1900, before any German service did. The German Navy followed in 1904, four years before the German Army made the P08 its standard pistol in 1908. So the shortest gun on our table is the one most people picture when they hear “Luger”, yet it was not the first to serve.

Luger barrel length, longest to shortest

ModelBarrelNotes from the video
Luger Carbine11¾ inWooden forend and its own shoulder stock
Artillery Luger (LP08)200 mm, about 8 inRear sight marked out to 800 meters; flat board stock
Navy Luger150 mm, about 6 inAdopted by the German Navy in 1904
Swiss Luger 06/29120 mm, 4¾ inMade by W+F in Bern
German Army P08100 mm, about 4 inStandard Army Luger of WWI, 9mm

### The Carbine: 11¾ inches

The Carbine is the longest of the five and the only one that looks like a long gun before the stock goes on. It wears a wooden forend under the barrel, and it has its own detachable shoulder stock. In the video we cycle the action first, then fit the stock.

Luger Carbine with its long barrel and wooden forend, held at the grip with its detachable wooden shoulder stock
The Luger Carbine: long barrel, wooden forend and its own shoulder stock.

### The Artillery Luger: 8 inches

The Artillery model, the LP08, carries a 200 mm barrel, roughly 8 inches. Its rear sight is marked out to 800 meters, a long way for a pistol cartridge, and the gun takes a flat board stock. In the video the stock goes on after the cycle, so you can see how the pistol and board fit together.

Long-barrel Artillery Luger held in gloved hands, with its flat board stock on the table beside it
The Artillery Luger, with its flat board stock beside it.

For a closer look at another LP08, see our Finnish Artillery Luger guide.

### The Navy Luger: 6 inches

The Navy Luger has a 150 mm barrel, about 6 inches. The German Navy adopted it in 1904, four years before the Army adopted the P08. On camera it gets the same unbroken cycle as the others, without a stock.

Navy Luger held upright in gloved hands, side view of the barrel and frame
The Navy Luger in the lineup.

### The Swiss Luger 06/29: 4¾ inches

The Swiss Luger in our lineup is a 06/29 made by W+F in Bern, with a 120 mm barrel, 4¾ inches. Switzerland was the first country to adopt the Luger, in 1900, but this particular pistol is a later one. The 1900 date belongs to the Swiss adoption, not to this gun.

Swiss Luger 06/29 with black grips held in gloved hands
The Swiss 06/29 in the lineup.

### The German Army P08: 4 inches

The shortest of the five is the standard German Army Luger of the First World War: the P08 in 9mm with a 100 mm barrel, about 4 inches. This is the one most people picture when they hear “Luger”. If you want to read the dates and stamps on one, our Luger P08 markings guide walks through them.

Short-barrel P08 Luger with brown wooden grips, toggle raised and action open
The P08 with the toggle up and the action open.

What the video shows on every gun

Every Luger in the lineup gets the same treatment, filmed in one take with no cuts inside the action:

1. Toggle open. The jointed toggle on top of the frame is pulled up and back, opening the action. 2. Magazine out. The magazine drops from the grip. 3. Toggle home. The toggle is released and runs forward, closing the action. 4. Magazine back in. The magazine goes back into the grip.

On the Carbine and the Artillery model, the cycle is followed by fitting the shoulder stock.

How to tell them apart at a glance

  • Forend under the barrel: the Carbine is the only one of the five with a wooden forend.
  • Long barrel with a rear sight marked to 800 meters: the Artillery LP08.
  • About 6 inches: the Navy.
  • 4¾ inches, W+F Bern: the Swiss 06/29.
  • About 4 inches, 9mm: the standard WWI Army P08.

Barrel length alone gets you most of the way. Markings and details settle the rest, and those are a subject for the close-up videos.

On the floor at OSA

All five Lugers in this video are shop pieces, not part of our own collection, and all five are with us for now. A Bern-made Waffenfabrik Bern Swiss Luger 06/29 is on the floor, the same model as the Swiss gun in the lineup. Related pieces in our case today:

The grid below updates by itself as pieces come and go.

If you want another Luger with a story behind it, our DWM 1902 Cartridge Counter Luger guide covers one of the rarer early guns.

The short version is on our Instagram. Watch it on Instagram.

General information for collectors, not legal advice. The Carbine’s barrel was measured on our gun; the other lengths are nominal specifications, and inch values for the metric barrels are rounded.

Common Questions

What barrel lengths do the main Luger models have?The Luger Carbine runs 11¾ inches, the Artillery LP08 200 mm (about 8 inches), the Navy 150 mm (about 6 inches), the Swiss 06/29 120 mm (4¾ inches) and the standard German Army P08 100 mm (about 4 inches). Other lengths exist, especially on commercial guns.
What is the barrel length of a standard P08 Luger?The standard German Army P08 has a 100 mm barrel, about 4 inches, and is chambered in 9mm.
How long is the barrel on an Artillery Luger?The Artillery Luger, or LP08, has a 200 mm barrel, roughly 8 inches, with a rear sight marked out to 800 meters.
How long is a Navy Luger barrel?The Navy Luger has a 150 mm barrel, about 6 inches. The German Navy adopted it in 1904.
Which country adopted the Luger first?Switzerland, in 1900. The German Navy followed in 1904 and the German Army adopted the P08 in 1908.
What is the barrel length of a Swiss 06/29 Luger?The Swiss 06/29, made by W+F in Bern, has a 120 mm barrel, 4¾ inches.

Sources

  • Wikipedia, “Luger pistol” — https://en.wikipedia.org/wiki/Luger_pistol (P08 100 mm barrel and 9mm; LP08 200 mm barrel and 800 m rear sight; Army adoption in 1908; Swiss 120 mm barrel)
  • American Society of Arms Collectors, “The Luger Short Story” (PDF) — https://americansocietyofarmscollectors.org/wp-content/uploads/2021/01/2015-B111-Luger-Short-Story.pdf (Navy Luger, 1904 adoption, 150 mm barrel)
  • Land of Borchardt, “Marine Modell 1904” — https://landofborchardt.com/mm19041.html (Navy Luger 1904)
  • Forgotten Weapons, “The First Military Luger: Swiss Model 1900 s/n 01” — https://www.forgottenweapons.com/the-first-military-luger-swiss-model-1900-s-n-01/ (Switzerland first to adopt, 1900)
  • Forgotten Weapons, “Swiss 1929 Simplified Luger” — https://www.forgottenweapons.com/swiss-1929-simplified-luger-yes-swiss-and-simplified/ (Swiss 06/29 made in Bern)
  • Carbine barrel length (11¾ in): measured on the gun in our lineup.